| MBD-X10SRi-F -B | X10SRi-F (Bulk Pack) |
| Physical Stats |
| Form Factor | ATX |
| Dimensions | 12" x 9.6", (30.5cm x 24.4cm) |
| Processor/Cache |
| CPU | - Intel® Xeon® processor E5-2600/1600 v3 family (up to 145W TDP **)
- Single Socket R3 (LGA 2011)
|
| Core / Cache | Up to 18 Cores / Up to 45MB Cache |
| Note | - ** Motherboard supports this maximum TDP. Please verify your system can thermally support
- ** E5-1600 series CPU does not support LRDIMM type memory
|
| System Memory |
|
| Memory Capacity | - 8x 288-pin DDR4 DIMM slots
- Up to 512GB DDR4 ECC LRDIMM
- Up to 256GB DDR4 ECC RDIMM
|
| Memory Type | 2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM/LRDIMM) / 284-pin gold-plated DIMMs |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| On-Board Devices |
| Chipset | Intel C612 chipset |
| SATA | - SATA3 (6Gbps) via C612 controller
- RAID 0, 1, 5, 10 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel® i350-AM2 Dual Port Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | ASPEED AST2400 BMC |
| Input / Output |
| SATA | 10x SATA3 (6Gbps) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 4x USB 3.0 ports (2 rear + 1 via header + 1 Type A)
- 8x USB 2.0 ports (2 rear + 6 via header)
|
| Video | 1x VGA port |
| Serial Port / Header | 1x serial port, 1x header |
| SuperDOM | 2x SuperDOM (Disk on Module) ports with built-in power |
| TPM | 1x TPM 1.2 20-pin Header |
